www.euroboor.com
18
3.1.2 Fitting the distance set bracket
The distance set bracket is a very useful tool for sawing multiple pieces on the same length.
This tool is, however, not fitted to the machine as it arrives. For fitting this tool, follow below
steps:
When the distance set bracket is mounted, untighten it a bit and adjust the distance set by
sliding the bracket back and forth.
3.2 Prior to use
Prior to any use, check the machine and all of its components for damage and check that all
moving parts are in perfect working order and do not jam. All parts must be correctly installed
and must fulfil all conditions necessary to ensure perfect operation of the machine.
Image 3-3
