Euro Shatal M12800, Инструкция по эксплуатации/Перечень запасных частей

Страница: 5 / 48

ST122 -4 - JAN. 2008
ENGLISH
PREFACE TO THE MANUAL
Before leaving our factory every machine passes an exacting inspection programme.
Following the instructions will ensure that your machine gives long service, in normal operating conditions.
The user advice and spare parts mentioned in this document are given as an indication, and do not constitute an
undertaking. No warrantee will be granted in the event of errors or omissions, or for damage occurring during
delivery, or caused by the design or use of the machine. We are very concerned about the quality of our products
and we reserve the right to make any technical modifications to improve them, without advance notice.
This document will:
•
Provide the user with information about the machine.
•
Information about its possible uses.
•
Prevent accidents due to unsuitable use, by an untrained person, during maintenance, repairs,
overhauls, handling or transport.
•
Improve the reliability and durability of the machine.
•
Ensure correct use, regular maintenance, and fast fault finding in order to reduce repair costs and
down time.
The manual should always be available at working site.
It should be read and used by any person installing or using the machine.
The obligatory technical regulations in force in the country where the machine is used must
also be adhered to for maximum safety.
SAFETY INSTRUCTIONS
•
Before starting, carefully read the engine maintenance and operating manual and follow all the instructions.
•
Stop the engine before refilling the fuel tank. Never refuel near a naked flame or sparks
which could start a fire. Don’t smoke. Use only pure fuel and clean filling equipment.
Take care not to spill fuel.
•
Do not run the engine in a closed or badly ventilated room-danger of poisoning!
Before starting the engine, ensure that no one is in the danger area close to the engine
or equipment, and that all protective guards are fitted.
•
Never operate the machine without the belt guard.
•
Keep hand and feet away from moving parts while the machine is running.
•
Do not operate the machine in closed places and inflammable environments.
•
Operating the machine is advisable only with good lighting conditions.
•
Hearing protection must be worn.
•
Foot protection must be worn.
•
Do not touch hot surfaces.