87
GB
Motor does
not start
No electricity
Check mains connection
Defective cable
Check the cable, plug it in, replace it if required, or
have it repaired by a qualified person
Defective safety
switch/plug combination
Arrange for repair in a specialist workshop
Overheat protection
activated
1. Working depth too large, set to the shorter depth
2. Blades blocked, remove the blockage
3. Soil too hard, select the correct work depth and
move it forwards and backwards several times while
slowly reducing the operation speed.
Wait until the motor cools down for around 15
minutes before reworking
Abnormal
noises
Blade is jammed
Switch it off and wait until it comes to a complete
stop. Remove the objects
Lubrication running out
Arrange for repair in a specialist workshop
Loose bolts, nuts or
other securing
components
Tighten all components, contact a specialist
workshop if noises prevail
Abnormal
vibrations
Blades damaged or
worn
Replace it or have it checked by a specialist
workshop
Working depth too large
Reduce the pressure on the handle.
Poor
scarification
results
Working depth too small
By pulling tiller back towards yourself, the tines will
dig deeper and more aggressively.
Worn blades
Replace it or have it checked by a specialist
workshop
WARRANTY
The Warranty for this product is З years from the date of purchase. Should this product fault in materials or
manufacture within З years from the date of purchase.
Please keep your original receipt as your proof of purchase. This warranty becomes void if the product has been
damaged or used or maintained improperly.
The warranty applies to defects in material or ·manufacture, does not cover product parts subject to normal wear.
Spinservice S.r.l.
Via Campalto, 3/D – 37036 San Martino Buon Albergo (VR) - Italy
SPINSERVICE S.r.l.
call center for Italy 800 595 595
call center for Slovenia 080 19 50
www.eurospin.it.