Euresys 1669-DR Picolo.net HD1, Руководство пользователя

Страница: 89 / 150

89
Proprietary PTZ Service
The proprietary PTZ service extends the ONVIF PTZ service to manage up to 4 PTZ cameras
sharing the same COM IO port. It allows to:
n
Set and get the serial port configuration of the COM IO device
n
Set and get the address configuration of each PTZ node
n
Get the address configurations of all the PTZ nodes
WSDL filename :
hd4PTZProprietary.wsdl
XML schema :
hd4PTZProprietary.xsd
SetPelcoSerialPortConfiguration operation
This operation allows to configure the serial port.
The request message
SetPelcoSerialPortRequest
contains the configuration of the serial
port device:
n
The element <Speed> specifies the numerical value of the baud rate. Allowed values: 1200,
2400, 4800, 9600
n
The element <DataBits> species the number of data bits. Allowed value range: [5:8]
n
The element <Parity> specifies the parity bit. Allowed values: None, Even, Odd
n
The element <StopBits> specifies the number of stop bits. Allowed values: 1, 2
n
The element <FlowControl> specifies the method to control the data flow. Allowed values:
None
The response message
SetPelcoSerialPortResponse
has no content.
GetPelcoSerialPortConfiguration operation
This operation allows to retrieve the configuration of the serial port.
The request message
GetPelcoSerialPortRequest
has no content.
The response message
GetPelcoSerialPortResponse
contains the actual configuration of the
serial port device:
n
The element <Speed> reports the numerical value of the baud rate.
n
The element <DataBits> reports the number of data bits.
n
The element <Parity> reports the absence (0), or the presence (1) of a parity bit.
n
The element <StopBits> reports the number of stop bits.
n
The element <FlowControl> reports the method to control the data flow.
SetPelcoNodeAddressConfiguration operation
This operation allows to set a PTZ node configuration.
Software Specifications Picolo.net Handbook