24h
4. Click dust cup back into place on unit.
3. Reattach filter and Cyclone.
3. Shake to remove dust.
2. Press other end into slot.
3.
9
How to maintain brushroll
To avoid unnecessary service calls, periodically check brushroll for debris. If brushroll gets clogged
it will automatically shut off. Turn vacuum off and unplug before attempting to remove clog.
1. Press
2. Pull out
1. Press
2. Pull out
Click!
3. Press
Replace brushroll release tab into slot and press down
to click it into place.
www.eureka.com
24h
How to maintain your vacuum cleaner
CAUTION
Never operate vacuum
in proper position.
WARNING:
Moving parts!
Recharge cleaner after
each use.
If debris cannot be removed easily, locate the brushroll release
tab on the right side and open the brushroll cover. Remove the
brushroll and clear any tangled hair and remaining debris.
Dust cup – Empty after each use
Click the dust cup release button, located
on the front of the handle just above the
dust cup and pull dust cup out.
Press lever to release bottom lid of dust cup
to empty debris.
Washable brushroll – clean frequently
To reassemble:
!
dust frequently. Every three months
!
CAUTION
Make sure vacuum cleaner is turned off and not
plugged into a power source.
WARNING:
Do not attempt to remove belt.
Call the Eureka Customer Service HELPLINE
at 1-800-282-2886.
1.
Click the dust cup release button,
located on the front of the handle
just above the dust cup and pull dust
cup out.
2.
