background image

Component List: 

1 Tent Body with Guy Ropes,  4 Wall Poles,  2 Roof Poles, 

1 Fly,  1 Carry Bag,  1 Stake Bag and Stakes,  1 Pole Bag

Assemble the long roof poles 

and slide them through the 

sleeves, diagonally across 

the roof.

Insert the ferrules into the 

ribbed section of the 

corner elbows.

Spread the tent out with the top side up. 

Raise one side of the roof and 

insert the wall poles into the 
the bottom of the elbows.

Drape the fly over the tent so 

that the yellow webs meet. 
Then pull the fabric out and 
over the corner elbows.

Insert the pin from the 

corner web/rings into 
the bottom ferrules.

Raise the other side to make a freestanding structure. 

Again at the corners, attach the J-hooks 

to the nylon rings on the webs. 

Lastly, this a tall, straight sided tent; it is 

important 

that you stake out all of the guylines.

ASSEMBLY INSTRUCTIONS:  
Copper Canyon 4 & 6 Tents  

YOUR TENT IS READY !

REV  A  6.11

Roof poles

Wall poles

Clip the tent to the wall poles. 

Then dress out the 

tent as you stake 
the web loops down. 

At the corners, reach under the fly 

and wrap the hook & loop straps 
around the wall poles. 

Отзывы: