EUNICYCLES SC-350 Скачать руководство пользователя страница 13

Страница: 13 / 17

Firmware update

The charger software version is displayed on the screen in the bottom line when the
charger is powered on.

5C38
v3.12

The latest version of the charger software is available on the website:

https://eunicycles.eu/SmartCharger/Firmware

If the version on the website is newer, download it, unpack it and carry out the process of
updating the charger software.

The update process:

1. Download and install the USB DFU drivers

https://eunicycles.eu/SmartCharger/DFU_Drive

r.zip

2. Then

Activation of the firmware update

in the charger settings menu

3. Within 15 seconds, connect the USB charger to the PC. If the cable is not plugged in
within 15 seconds of activating the software update, the charger will restart and return to
normal operation.

4. Run the

UPLOAD.bat

file from the new version folder. After the upgrade, a set of

messages should appear on the computer screen as below.

4. Then disconnect the charger from the power supply and switch it on again after a few
seconds.

King Song Poland

Содержание SC-350


















Результаты поиска

Содержание SC-350

Отзывы:

Похожие инструкции для SC-350

Бренды по названию

Популярные бренды

EUNICYCLES SC-350, Руководство пользователя

Результаты поиска

Содержание SC-350

Отзывы:

Похожие инструкции для SC-350

Бренды по названию

Популярные бренды