7
EN
EN
8
5
TRAINING
YOUR DOG
Find an appropriate shock level.
●
Always start with the lowest level.
●
The appropriate shock level can be found when your dog responds to the shock
with a mild reaction, such as tensing the muscles in the neck.
●
The shock level also varies depending on the trainings you deliver. For a training
that requires high concentrations, your dog might need a shock of higher level.
Button
Mode Switch
When Pressed
The collar plays a beep sound.
The collar vibrates.
*The vibration will stop automatically if you
hold the button for more than 10 seconds.
The collar delivers an electric shock to the dog,
ranging from level 1 to 16.
*The electric shock will stop automatically if
you hold the button for more than 10 seconds.
or
6
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. (4) Consult the dealer or an
experienced radio / TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
Notice:
Shielded cables
All connections to other computing devices must be made using shielded cables to
maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
or
or
