EUCHNER CET.-AR Series Скачать руководство пользователя страница 9

Страница: 9 / 52

2110788-13-03/20 (Translation of the original operating instructions)

Operating Instructions

Transponder-Coded Safety Switch CET.-AR-…

6. Function

The device permits the locking of movable guards.
The system consists of the following components: coded actuator (transponder)

and switch.
Whether the device learns the complete actuator code (unicode) or not (multicode)

depends on the respective version.

Devices with unicode evaluation

: The actuator must be assigned to the

safety switch by a teach-in operation so that it is detected by the system. This

unambiguous assignment ensures a particularly high level of protection against

tampering. The system thus possesses a high coding level.

Devices with multicode evaluation

: Unlike systems with unique code detec-

tion, on multicode devices a specific code is not requested but instead it is only

checked whether the actuator is of a type that can be detected by the system

(multicode detection). There is no exact comparison of the actuator code with

the taught-in code in the safety switch (unique code detection). The system pos-

sesses a low coding level.

When the guard is closed, the actuator is moved towards the safety switch. When

the operating distance is reached, power is supplied to the actuator by the switch

and data are transferred.
The safety outputs

are switched on when the locking pin is in the recess (state:

door closed and locked) and a permissible code is detected.
When guard locking is released, the safety outputs

and the monitoring output

(OUT) are switched off.

Important!

CET3 (closed-circuit current principle)

The activation of the guard locking solenoid results in the shutdown of

the safety outputs OA/OB and the monitoring output OUT.

CET4 (open-circuit current principle)

The interruption (> 5 ms) of the power supply to U

results in the shut-

down of the safety outputs OA/OB and the monitoring output OUT.

In both cases, the outputs are shut down independent of the actual po-

sition of the solenoid.

For more detailed information, see also chapter

10.12. Notes on opera‑

tion with safe control systems on page 35

In the event of a fault in the safety switch, the safety outputs are switched off and the DIA LED illuminates red. The oc-

currence of faults is detected at the latest on the next demand to switch on the safety outputs (e.g. on starting).

6.1. Guard lock monitoring

All versions feature two safe outputs for monitoring guard locking (OA and OB). The safety outputs are switched off when

guard locking is released.

6.2. Monitoring output (OUT)

The monitoring output is switched on as soon as guard locking is active (state: door closed and locked) and the transponder

has been recognized.

Ramp/switch head

Plunger

Ramp

Transponder

Spring-

mounted

guard

locking pin

Recess

Содержание CET.-AR Series





















































Результаты поиска

Содержание CET.-AR Series

Отзывы:

Бренды по названию

Популярные бренды

EUCHNER CET.-AR Series, Руководство по эксплуатации

Результаты поиска

Содержание CET.-AR Series

Отзывы:

Бренды по названию

Популярные бренды