EUCHNER 158320, Руководство по эксплуатации, Страница: 17 / 48

17
2527246-01-08/19 (Translation of the original operating instructions)
Operating Instructions
Safety System MGBS-P-L.-AR…
EN
8.3.2. Preparing AE-R-S1
Profile width Length required for actuation
axis
Which EUCHNER parts are required? Necessary work steps
Without plates With mounting
plates
(4 mm each)
D D+9 D+17
30 mm 39 mm 47 mm Standard inner door handle
with 107 mm axis (order no.158322)
Shorten to required length
40 mm 49 mm 57 mm Standard inner door handle
with 107 mm axis (order no.158322)
If necessary,
extended actuation axis (order no. 106761)
Without mounting plates :
None
With mounting plates :
Use extended actuation axis and protective sleeve and
shorten to required length
45 mm 54 mm 62 mm Standard inner door handle
with 107 mm axis (order no.158322)
and
extended actuation axis (order no. 106761)
Use extended actuation axis and protective sleeve and
shorten to required length
50 mm 59 mm 67 mm Standard inner door handle
with 107 mm axis (order no.158322)
and
extended actuation axis (order no. 106761)
Use extended actuation axis and protective sleeve and
shorten to required length
1
Insert actuation axis.
The snap ring A must be in contact
with the inner door handle B.
2
Fit door handle.
3
Tighten fixing screw to 2 Nm.
4
Fit protective sleeve.
4
1
2
3
A
182
D - 1 *
107
39,5
D
11,5
55,5 55,5
M4
25
0
D + 9
Example without mounting plates
Standard
protective
sleeve
Extended
protective
sleeve
Standard
actuation axis
Extended
actuation axis
Escape release
Handle module
+4 mm per mounting plate