DMX-E05(Product No.:401000020101)
Touch Panel
Function Description
Dimension(mm)
Technical Parameters
Product Feature
1/2
User’s manual: 2019-12
www.euchips.com
Model
DMX-E05
Input Voltage
12-24VDC
Dimming Type
Input Power
Area number
Working Temperature
Channels
Packing Size
N.W
DMX512
2.5W
6
83.5g
Transmission Distance
300m
RF Function
Support
0
℃
~+50
℃
8
145x135x48(mm)
Dimension
86*86*10(mm)
· Comply With Dmx512 (1990) International Standard Protocol
· Supports Brightness Control Of 4 Regions Independently Or Synchronously
Supports real-time brightness adjustment
· Highly Sensitive Glass Touch Buttons And Adjustment Rings For More Precise Control
· Made Of Glass, The Appearance Is Fashionable And Beautiful
· Compatible With Any Dmx Luminaire Or Dmx Driver
· Can Be Installed On The Wall, Suitable For All Kinds Of Wall Boxes.
Support RF functions, brightness, call the built-in scene
In the closed state, click the "switch button" to open the DMX panel, and the light fixture
controlled by the panel will light up according to the last closed state. Click the "switch
button" in the open state, then the panel can be closed. All controlled lamps and lanterns
will be off, and the switch indicator will be off.
This panel supports 4 DMX zones, 4 channels for each zone, i.e., zone 1 is channel 1, zone 2
is channel 2, zone 3 is channel 3, and zone 4 is channel 4. Each area has its own indicator
light. Click the zone1/2/3/4 area button to select the corresponding area respectively. The
luminaries in this area will light up according to the brightness closed last time, and the
corresponding area selection indicator will light up at the same time, indicating that the
luminaries in this area can be adjusted.
You can click and select another area to switch the area. The luminaire effect of other
area is changeless at this moment. Only when the light of the selected area is on can the
area be edited.
When an area is selected, click the icon of the area again to cancel the selection of the
area, and the area indicator light is off.
When you need to edit the luminance of lamps, you can use the powerful real-time editing
function of this panel. Note: the lamp effect can only be edited after the corresponding
area is selected.
ON/OFF
Area Dimming
Built-in Mode
After selecting a region or all regions.
Click the Scene1/2/3/4 button to call the four scenes saved by the user. Only one scenario
can be invoked at a time. Brightness cannot be adjusted in scene call mode.
After dimming the lamps in one or more areas, long press the scene button for 3
seconds. When the indicator light goes off, the lighting effect of the current 1/4 area is
successfully saved in the scene.
Up to four user-defined scenarios can be saved. You can save the new scene effect again
on the scene button of a saved scene (note: the saved scene will be overwritten).
Lighting Effect Editing
Touch Ring
After selecting the area, touch the lamp with different brightness on the adjustment ring
to change the corresponding brightness accordingly. Move clockwise, the light gets
brighter, move counterclockwise, the light gets darker.
ON/OFF
Zone
Brightness ring
Scene
86
86
67
5.5
4
7.5
10
27
7
60
Panel Description
