ettus USRP-2900, Начало работы

Страница: 3 / 17

NI USRP-2900/2901 Getting Started Guide
This document explains how to install, configure, and test the following USRP
devices:
■
USRP-2900 Software Defined Radio (USRP-2900)
■
USRP-2901 Software Defined Radio (USRP-2901)
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits
for electromagnetic compatibility (EMC) stated in the product specifications. These
requirements and limits provide reasonable protection against harmful interference
when the product is operated in the intended operational electromagnetic
environment.
This product is intended for use in industrial locations. However, harmful
interference may occur in some installations, when the product is connected to a
peripheral device or test object, or if the product is used in residential or
commercial areas. To minimize interference with radio and television reception and
prevent unacceptable performance degradation, install and use this product in strict
accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved
by National Instruments could void your authority to operate it under your local
regulatory rules.
Verifying the System Requirements
To use the NI-USRP instrument driver, your system must meet certain requirements.
Refer to the product readme, which is available on the driver software media or
online at ni.com/manuals , for more information about minimum system
requirements, recommended system, and supported application development
environments (ADEs).
© National Instruments
3
USRP-2900/2901 Getting Started