10
AP-40
User Manual
Remote Control
(Note:
Our products are updated irregularly, the layout of the remote control may
vary)
Routine Maintenance - ATTENTION! only proceed when power is disconnected
1.
Primary dust collector: Use both hands to press down the latch, open the back cover,
take out the dust
fi
lter, and use a vacuum cleaner to remove the surface dust. Then put it back
in the device and keep using it.
2.
Photocatalytic Nano Filter: This
fi
lter can be cleaned regularly using a vacuum
cleaner to remove surface dust. It can continue to be used after cleaning.
3.
Dust cover of the dust sensor: Remove the dust cover of the dust sensor, gently wipe it
with a brush or dry cloth and blow off the dust. (
Caution:
do not use any liquid for cleaning!)
On/Off
Manual Mode
UV Sterilisation
Automatic Mode
(intelligent Air Purification)
Confirm HEPA Filter Replacement
(press 5 seconds)
Sleep/Night Mode
(quiet operation)
Confirm UV-Lamp Replacement
(press 5 seconds)
