Page 9
3101 Mt Carmel Ave. Glenside, PA │ 833-ENV-GURU (833- 368-4878)
VIII. Warranty
Electro-Tech Systems, Inc. warrants its equipment, accessories and parts of its manufacture to be and
remain free from defects in material and workmanship for a period of one (1) year from date of invoice.
ETS will, at its discretion either replace or repair without charge, F.O.B. Glenside, similar equipment or
a similar part to replace any equipment or part of its manufacture which, within the above stated time,
is proved to have been defective at the time it was sold. All equipment claimed defective must be
returned properly identified to the Seller (or presented to one of its agents for inspection). This
warranty only applies to equipment operated in accordance with Seller's operating instructions.
Seller's warranty with respect to those parts of the equipment that are purchased from other
manu
facturers shall be subject only to that manufacturer’s warranty.
The Seller's liability hereunder is expressly limited to repairing or replacing any parts of the equipment
manufactured by the manufacturer and found to have been defective. The Seller shall not be liable for
damage resulting or claimed to result from any cause whatsoever.
This warranty becomes null and void should the equipment, or any part thereof, be abused or modified
by the customer of if used in any application other than that for which it was intended. This warranty to
replace or repair is the only warranty, either expressed or implied or provided by law, and is in lieu of
all other warranties. The Seller denies any other promise, guarantee, or warranty with respect to the
equipment or accessories and, in particular, as to its or their suitability for the purposes of the buyer or
its or their performance, either quantitatively or qualitatively or as to the products that it may produce.
The buyer is expected to expressly waive rights to any warranty other than that stated herein.
ETS must be notified before any equipment is returned for repair. ETS will issue an RMA (Return
Material Authorization) number for return of equipment.
Equipment should be shipped prepaid and insured in the original packaging. If the original packaging
is not available, the equipment must be packed in a sufficiently large box (or boxes if applicable) of
double wall construction with substantial packing around all sides. The RMA number, description of the
problem along with the contact name and telephone number must be included in formal paperwork
and enclosed with the instrument. Round trip freight and related charges are the owner’s responsibility.
