background image

 

48 

Warranty 

ets-lindgren.com 

 

The preceding paragraphs set forth Buyer’s exclusive remedies and Seller’s sole 

liability for claims based on failure of the products to meet any warranty, whether 

the claim is in contract, warranty, tort (including negligence and strict liability) or 

otherwise, and however instituted, and, upon the expiration of the applicable 

warranty period, all such liability shall terminate. IN NO EVENT SHALL SELLER 

BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR 

CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF, OR AS A 

RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, 

ASSEMBLING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART 

THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE 

INCURRED WITHOUT SELLER’S WRITTEN CONSENT DESPITE ANY 

NEGLIGENCE ON BEHALF OF THE SELLER. IN NO EVENT SHALL SELLER’S 

LIABILITIES UNDER ANY CLAIM MADE BY BUYER EXCEED THE 

PURCHASE PRICE OF THE PRODUCT IN RESPECT OF WHICH DAMAGES 

ARE CLAIMED. This agreement shall be construed in accordance with laws of 

the State of Texas. In the event that any provision hereof shall violate any 

applicable statute, ordinance, or rule of law, such provision shall be ineffective to 

the extent of such violation without invalidating any other provision hereof. 

Any controversy or claim arising out of or relating to the sale, delivery, non-

delivery, servicing, assembling, use or loss of use of the products or any part 

thereof or for any charges or expenses in connection therewith shall be settled in 

Austin, Texas by arbitration in accordance with the Rules of the American 

Arbitration Association, and judgment upon the award rendered by the Arbitrator 

may be entered in either the Federal District Court for the Western District of 

Texas or the State District Court in Austin, Texas, all of the parties hereto 

consenting to personal jurisdiction of the venue of such court and hereby waive 

the right to demand a jury trial under any of these actions. 

Содержание 7001-001


















































Отзывы: