ETOP ATX-E15, Руководство пользователя

Страница: 35 / 90

ATX-E15 User`s Manual 27
COM1 Serial Port
COM1, a 9-pin D-Sub male connector, is the onboard COM1 serial
port of the E15. The following table shows its pin assignments.
Pin # Signal Name
1 DCD, Data carrier detect
2 RXD, Receive data
3 TXD, Transmit data
4 DTR, Data terminal ready
5 GND, ground
6 DSR, Data set ready
7 RTS, Request to send
8 CTS, Clear to send
9 +5V,Ring-IN or +12V
COM2 Serial Port
COM2, a 10-pins box-header connector, is the onboard COM2 serial
port of the PISA-E3. The following table shows its pin assignments.
Pin # RS232 Mode
Signal Name
RS422/RS485 Mode
Signal Name
1 DCD, Data carrier detect
TX- (422/485)
2 RXD, Receive data TX+ (422/485)
3 TXD, Transmit data RX+ (422)
4 DTR, Data terminal ready
RX- (422)
5 GND, ground GND
6 DSR, Data set ready
N.C.
7 RTS, Request to send N.C.
8 CTS, Clear to send
N.C.
9 +5V,Ring-IN or +12V N.C.
10 N.C. N.C.