3
2.2 Key Description
There are 26 buttons on the front panel (not including POWER button). The word on each button represents the
basic function. Press the button directly to use the basic function. The word beneath button represents the second
function of the key. Press
[Shift]
button and then function button to select its second function. Firstly, press
[Shift]
button and the button backlight turns on. Then press the function key, followed by a short beep sound (Beeper is
set ON).
Key name
Main function
Second function
0
Input digit 0
1
Input digit 1
Save
2
Input digit 2
Recall
3
Input digit 3
4
Input digit 4
Utility
5
Input digit 5
List set
6
Input digit 6
7
Input digit 7
8
Input digit 8
9
Input digit 9
●
Input decimal point
Clear
Exit
ProtClear: clear protection
Menu
Select menu
I-set
Set current
V-set
Set voltage
ListRun
Turns on/off the auto-run programs
OCP
Set Over Current Protection value
OVP
Set Over Voltage Protection value
Shift
Select the second function
Lock
1.
Lock the front panel
2.
Switch to local operation
On/Off
Turn on/off output
Move flash digit to the left/right
Move flash digit up and down; Increase or
decrease value.
Enter
Confirm input
2.2 Indicator Description
There are 4 LED indicators on the front panel: CV, CC, OP, REM.
CV indicator (Green): This indicator lights on in GREEN to indicate a CV operation mode.
CC indicator (Red): This indicator lights on in RED to indicate a CC operation mode.
OP indicator (Red): This indicator lights on in RED to indicate a protection mode.
REM indicator (Green): This indicator lights on in GREEN to indicate a remote operation mode.
