Etnyre M-752-02R1 Скачать руководство пользователя

Страница: 2 / 42

GENERAL

INFO & ID

M-752-02R1

Starting with S/N V1001

Updated May 24, 2016

LIVE BOTTOM

OPERATION MANUAL

HOW TO ORDER PARTS

To assure prompt delivery when ordering parts, please furnish the following information: 1)

Complete name and address of consignee. 2) Method of shipment preferred. 3) Is shipment

to be prepaid or collect? 4) Serial numbers of units to which parts apply. 5) Complete part

numbers and descriptions. 6) Any special instructions.

Specify unit serial number when ordering parts!

UNIT WARRANTY

E. D. Etnyre & Co. warrants to the original Purchaser, its new product to be free from defects in

material and workmanship for a period of twelve (12) months after date of delivery to original

Purchaser. The obligation of the Company is limited to repairing or replacing any defective part

returned to the Company and will not be responsible for consequential damages or any further loss

by reason of such defect.
This warranty does not obligate the Company to bear the cost of machine transportation in connection

with the replacement or repair of defective parts, nor does it guarantee repair or replacement of any

parts on which unauthorized repairs or alterations have been made or for components not manufac-

tured by the Company except to the extent of the warranty given by the original Manufacturer.

This warranty does not apply to:
(1) Normal start-up services, normal maintenance services or adjustments usually performed

by the selling dealer, factory service representative or customer personnel.

(2) Any product manufactured by E. D. Etnyre & Co. purchased or subjected to rental use.
(3) Any product or part thereof which shows improper operation, improper maintenance, abuse,

neglect, damage or modification after shipment from factory.

(4) Any product or part thereof damaged or lost in shipment. Inspection for damage should be

made before acceptance or signing any delivery documents releasing responsibility of the

delivering carrier.

This warranty and foregoing obligations are in lieu of all other obligations and liabilities including

negligence and all warranties of merchantability or otherwise, express or implied in fact or by law.

The company excludes all implied warranties of merchantability and fitness for a particular purpose.

There are no warranties, express or implied, which extend beyond the description of the goods

contained in this contract.

E. D. ETNYRE & CO., Oregon, Illinois 61061-9778

1333 South Daysville Road Phone: 800-995-2116 Fax: 800-521-1107

www.etnyre.com

[email protected]

Содержание M-752-02R1











































Результаты поиска

Содержание M-752-02R1

Отзывы:

Похожие инструкции для M-752-02R1

Бренды по названию

Популярные бренды

Etnyre M-752-02R1, Руководство пользователя

Результаты поиска

Содержание M-752-02R1

Отзывы:

Похожие инструкции для M-752-02R1

Бренды по названию

Популярные бренды