5
For Support Contact +46 8 25 28 75, [email protected] or +61 2 9956 7377, [email protected]
2.1 System
Device Data
Firmware version (TOP)
Hardware number (HW#)
IMEI Number
Date and Time
Module Temperature
Supply Volage
Battery Voltage
Rolling network Information
Server Adress
Add a server to receive data being sent from the device. This can be configured in the configuration
tool shown below or via SMS command shown above.
Check for Firmware (FW) Updates
Device will connect to the internet to check if the firmware is up to date.
Restart Device
Restart the device without using the hardware buttons
2.2 Settings
Select APN & Select User/PassW
Select which APN to use. APN can be added using the configuration tool shown below, or via SMS
command shown above. The same thing applies to Select User/PassW
Logging
This is where you activate continuous logging and sending as well as GPS. Make sure you have a
server address added for receiving data. Check this by navigating system
→
server address
