GETTING STARTED
IPL-3G UMTS router
Page 21
3
Connecting the PC to the Html server
First set up or Set up modifications :
For the first configuration, PC has to be connected directly to the Ethernet LAN interface of the
IPL-3G router.
Modifications can be carried out from the Internet using a port forwarding rule, or a remote
user PPTP or TLS or L2TP/ IPSec connection or a VPN connection.
Administration server address :
The configuration of the IPL-3G router is performed using a standard html browser.
The administration html server is located at the LAN IP address of the router .
The factory IP address is 192.168.0.128.
Copy and paste :
When entering a parameter, It can be useful to paste some string when it is long to avoid
errors. In that case, paste the string, delete the last character of the pasted string, and enter it
again with the keyboard.
Network IP address :
Later in the text, we often speak of “network address”.
We mean the lowest value of the addresses of the network.
For instance, if the netmask of a network is 255.255.255.0, the network address of that
network is X.Y.Z.0.
Saving and restoring the parameters file
A parameters file can only be downloaded to a product having the same firmware version. It is
why, we advise to assign a name to a parameter file including the product name and the
software version like for instance “myrouterfile_iplad21220_V241.bin”.
Restoring the factory IP address :
The factory IP address of the router on the LAN interface can be restored by setting the DIP
switches SW01 ON and SW02 OFF.
In that position of the DIP switches, the stored configuration is not deleted.
Setting the DIP switches in that position gives also a free access to the administration server
from the LAN interface.
During operations, the DIP switches must not be left in that position.