ETIC 1220, Руководство пользователя, Страница: 30 / 64

HTML SET UP & DIAGNOSTIC
9
Assigning an IP address to the LAN interface
An IP address must be assigned to that interface.
The HTML server is located at that IP address.
To assign an IP address to the LAN interface,
•
select the “IP protocol and IP routing” menu and then the IP menu;
•
enter the IP address, the netmask and the default gateway address.
10
IP routing and broadcast filtering
The SHDSL XSLAN switch is an Ethernet switch; it works like any usual
switch and it is able to transmit any upper level protocol.
It is why, generally, it is not necessary to enable the IP routing function.
However, the IP routing feature can be used in particular cases, to avoid
to transfer multicast or broadcast frames or other traffic towards the
SHDSL link.
In that case, to make IP routing possible,
1. The SHDSL network has to be set as an IP network. An IP address
must be assigned to the SHDSL interface of the XSLAN.
Remark : if the XSLAN provides two SHDSL interfaces (XSLAN-400, -
2220, -2230); the same IP address has to be assigned to both.
2. The network connected to the LAN interface of the XSLAN must be a
different IP network from the SHDSL IP network and from other networks.
For instance, referring to the
drawing below, if the XSLAN Nr 1
is used as a router, the IP @ of
the network 1 must be different
from the IP @ of the SHDSL
network and from network 2
3. Routes must be created or the RIP protocol must be enabled.
Page 30 User’s guide ref 9014709-02 XSLAN SHDSL switch