PREPARING THE SETUP
DOC_DEV_XSRACK_User guide_A
Page 21
2
Temporary return to the factory settings
If the IP address of the XSRACK slot could not be founded, or if it is impossible to access the administration
server, for example, following a bad VLAN configuration, it is possible to restore the factory settings without
losing the current configuration.
•
Press the push-button located on the rear pannel
•
Keep the push-button pressed for about 3 seconds;
•
The LED blinks red rapidly
•
The administration server becomes accessible at the factory IP address (192.168.0.128), in HTTP without
a password. The factory configuration is temporarily running. However, the current configuration is not
lost and it is the one that is still displayed in the pages of the Administration Server.
•
After reading the IP address or changing some parameters, press again the push button or reboot the
product.
•
The product can be reached at the registered IP address.
Note :
If the IP address of the XSRACK slot is unknown, the software tool
EticFinder
can be used.
This software detects all ETIC branded products on a local network. After starting the software, click on the
"Search" button, and when the product list is displayed, double-click on the product address to access the html
server.
3
Restoring the factory settings
It is possible to restore the factory configuration permanently using the push button on the rear panel, or by
using the administration server. In this case, the current configuration will be lost unless it has been saved to
a file.
To restore the factory settings using the push button,
•
Power off the XSRACK,
•
Press the push button corresponding to the chosen slot,
•
Power on the XSRACK, while keeping the push-button pressed at least 10 s.
The LED turns red ; the XSRACK slot boots and the factory configuration is restored.
Note : The factory configuration can also be restored via the menu
Maintenance > Configurations
management
of the administration server.
Содержание XSRACK
Страница 1: ...DOC_DEV_XSRACK_User guide_A XSRACK Switch SHDSL _________________ USER GUIDE _________________ ...
Страница 4: ......
Страница 6: ......