background image

STAINLESS STEEL 

THERMADATA

®

 

LOGGER

 

Recording Thermometers

Quick Start Guide

Remove old versions of 

ThermaData Studio software prior 

to installing new version (your data 

files will not be removed or lost)

PC SOFTWARE FOR THIS 
INSTRUMENT

Install ThermaData Studio which 

can be downloaded free from 

 

etiltd.com/downloads. For further 

queries, please contact our 

technical sales on 01903 202151 or 

[email protected]
When the 'ThermaData Studio 

Software Setup Wizard' box 

appears, click the next button. 
The program files will be installed 

by default to... 'C:\Program Files\

ETI Ltd\ThermaData Studio\' 

(Recommended).
The 'Change…' button can be used 

to install to an alternate location 

(Advanced Users).
When the 'Custom Setup' box 

appears, click the 'Next' button 

(Thermocouple ThermaData 

Loggers do not require drivers).
The final installation dialogue box 

gives a last opportunity to go back 

and revise the installation settings.  

Click the 'Install' button to install 

the software.  A moving bar will 

show the installation progress.

Click the 'Finish' button to exit the 

installation procedure.
The icon for the ThermaData 

Studio software will be placed on 

the desktop.  A ThermaData Studio 

shortcut will be placed in 'Start 

menu' - 'Programs' - 'ETI Ltd'.

SETTING UP THE LOGGER

•   Unscrew the USB end cap and 

connect the logger to the PC’s 

USB port directly or use the USB 

extender supplied.

•   Select 'Logger Settings' from the 

drop-down 'Logger' menu.

•   Enter a name for the logger in the 

Title (User ID) box.

•   Select temperature settings for 

'over' or 'under' alarm using the 

drop-down menu boxes.

•   Select the data storage method 

- 'Stop when full' or 'Overwrite 

oldest data'.

•   Select a 'Start Delay' (note: for 

immediate start enter 0 hours, 0 

minutes).

•   Select the logging interval (note: 

the total time the log will last is 

shown below the drop-down 

box).

•   Click the 'Send Settings' button.
•   Start the logger by clicking the 

'Start button' on the PC screen.

•   Refit the USB end cap ensuring 

that the O Ring is  

undamaged or not twisted/

trapped to ensure that the unit  

remains watertight.

GUARANTEE

 

- This instrument 

carries a two-year guarantee 

against defects in either 

components or workmanship. 

During this period, products that 

prove to be defective will, at the 

discretion of ETI, be either repaired 

or replaced without charge. This 

guarantee does not apply to 

probes, where a six-month period 

is offered. The product guarantee 

does not cover damage caused 

by fair wear and tear, abnormal 

storage conditions, incorrect use, 

accidental misuse, abuse, neglect, 

misapplication or modification. 

Full details of liability are available 

within ETI's Terms & Conditions 

of Sale at etiltd.com/terms. In line 

with our policy of continuous 

development, we reserve the right 

to amend our product specification 

without prior notice.

545-297/03.09.19

Manufactured by

Electronic Temperature Instruments Ltd

Worthing · West Sussex · BN14 8HQ 

01903 202151 · [email protected] · etiltd.com

Отзывы: