South Bend, Indiana USA
|
networketi.com
SNOW/ICE CONTROL INSTALLATION GUIDE | PART NO.
24455
REV
D
PACKING LIST
QTY.
PART NO. DESCRIPTION
1
23736
PD Pro
1
23731
Accessory Kit
1
24455
PD Pro Installation Sheet (this document)
1
23735
PD Pro Instruction Manual
MODEL PD PRO
AUTOMATIC SNOW/ICE MELTING SYSTEM CONTROL PANEL
The Snow Switch Model PD Pro Automatic Snow and Ice Melting System is permanently connected equipment
and does not have an internal disconnect device. A readily accessible disconnect device, short circuit, and current
protection shall be provided and are not supplied by ETI When power is applied, the system will start.
NOTE:
Power Cable
(provided by customer)
Size for 30 Amp
maximum load
Sensor Wiring
#18 AWG jacketed,
3-conductor
Heater Cable
(provided by customer)
Size to system load
Remote Wiring
#22 AWG jacketed,
2-conductor
Temperature Sensor
Assembly Wiring
#22 AWG jacketed,
2-conductor
To Heater Cable
Heater Load Line / Yellow
Heater Load Neutral / Yellow
Heater Ground (shield)/Green
