EtherWAN EX94000, Быстрый старт

Страница: 6 / 27

Hardened Ethernet Switch
6
 Supports DIN-Rail or Panel Mounting installation.
 For use in Pollution Degree 2 Environment.
 This equipment is suitable for use in hazardous
locations (applicable to versions with terminal block
power option).

Field Wiring Terminal Markings: Use Copper
Conductors Only, 60/75
℃
, wire range 12-24
AWG, torque value 7 lb-in.
 This equipment is suitable for use in Class I,
Division 2, Groups A, B, C and D or
non-hazardous locations only.
 WARNING – EXPLOSION HAZARD – Do not
disconnect equipment unless power has been
removed or the area is known to be
non-hazardous.
 WARNING – EXPLOSION HAZARD –
Substitution of components may impair
suitability for Class I, Division 2.
 WARNING – Exposure to some chemicals may
degrade the sealing properties of materials
used in the Sealed Relay Device.
 RECOMMENDATION – It is recommended to
inspect the sealed relay device periodically and
to check for any degradation of the materials
and to replace the complete product, not the
sealed device, if any degradation is found.