EtherWAN EX94000, Быстрый старт

Страница: 14 / 27

Hardened Ethernet Switch
14
LED State Indication
POWER
Steady
Switch is properly connected to power and
turned on.
PWR1
PWR2
(Green)
Off
Switch is not connected to power and is turned
off.
FAULT
Steady
 Power redundant system failure occurred.
 Port failure occurred (when port fault alarm
dip switch is enabled).
FAULT
(Red)
Off
 Power redundant system failure is not
occurred.

Port failure is not occurred (when port fault
alarm dip switch is enabled).
 Port fault alarm dip switch is disabled.
10/100TX or 100FX/BX
Steady
A valid network connection established.
LNK stands for LINK.
LINK/ACT
(Green)
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
Steady
Light solid yellow for a port transferring at
100Mbps.
100
(Yellow)
Off
The port is transferring at 10Mbps If this LED is
dark.
Physical Ports

This switch provides:

Four 10/100Base-TX ports + two 100Base-FX/BX port

Five 10/100Base-TX ports

Four 10/100Base-TX ports + one 100Base-FX/BX port

Eight 10/100Base-TX ports + one 100Base-FX/BX port

Eight 10/100Base-TX ports

Six 10/100Base-TX ports + two 100Base-FX/BX ports

Four 10/100Base-TX ports + four 100Base-FX/BX ports
CONNECTIVITY

RJ-45 connectors

SC or ST connector on 100Base-FX fiber port

SC connector on 100Base-BX fiber port