EX49000 Hardened Web-Smart PoE Ethernet Switch www.etherwan.com
This quick start guide describes how to install and use the Hardened Web-Smart PoE (Power over
Ethernet) Ethernet Switch. Port and LED number will vary on different models. This user's manual will
only use EX49162 to cover all models.
Physical Description
The Port Status LEDs and Power Inputs
LED State
Indication
Steady Power
on.
Power1
Power2
Off Power
off.
Steady
Power redundant system failure occurred.
Fault
Off
Power redundant system failure is not occurred.
10/100Base-TX
Steady
A valid network connection established.
Link/ACT
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
Steady
Valid port connection at 100Mbps.
10/100
Off
Valid port connection at 10Mbps.
Steady
Powered device (PD) is connected.
PoE
Off
Powered device (PD) is disconnected.
LED State
Indication
Gigabit Ethernet
Steady
A valid network connection established.
Link/ACT
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
Steady
A valid TX connection established.
TX
Off
No valid TX connection established.
Steady
A valid SFP connection established.
SFP
Off
No valid SFP connection established.
DC Terminal Block Power Inputs: There are two pairs of power inputs can be used to power up this switch.
Redundant power supplies function is supported.
Power Input Assignment
＋
47-57VDC
Power2
－
Power Ground
＋
47-57VDC
Power1
－
Power Ground
Earth Ground
Terminal Block
Relay Output Rating
1A @ 24VDC
The 10/100Base-TX (PoE) and Gigabit Ethernet Connectors
The 10/100Base-TX (PoE) Connections
The following lists the pinouts of 10/100Base-TX ports.
Pin Signal Name Signal Definition
1 TD
＋
Output
Transmit
Data
＋
2 TD
－
Output
Transmit
Data
－
3 RD
＋
Input Receive Data
＋
4 PoE
Positive
(VCC
＋
)
5 PoE
Positive
(VCC
＋
)
6 RD
－
Input Receive Data
－
7 PoE
Negative
(VCC
－
)
8 PoE
Negative
(VCC
－
)
1
70G-EX49000Q1
