EtherWAN EX1616W Скачать руководство пользователя страница 1

24-Port Web-Smart Ethernet Switch

 

User’s Manual 

FCC Statement 

The FCC (Federal Communications Commission) restricts 
the amount of radio frequency emission and radiation coming 
from computer equipment. 

The equipment introduced in this manual has been tested 
and found to comply with the limits for a Class A digital 
device pursuant to Part 15 of the FCC rules. These limits are 
designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial 
environment. 

This equipment generates, uses, and can radiate radio 
frequency energy, and if not installed and used in 
accordance with the instruction manual, may cause harmful 
interference to radio communications. 

Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user is required 
to correct the interference at his/her own expense. 

Any changes or modifications not expressly approved by the 
manufacture would void the user’s authority to operate the 
equipment. 

 

Trademarks 

Product names mentioned in this manual may be trademarks 
or registered trademarks of those products.  
 
All trademarks or brand names mentioned are properties of 
their respective companies. 
 

Содержание EX1616W


























Отзывы: