EL2321 Media Converter
1
EL2321 User’s Guide
FCC Statement
The FCC (Federal Communications Commission) restricts the amount of radio
frequency emission and radiation coming from computer equipment.
The equipment introduced in this manual has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user is required to correct the interference at his/her own expense.
Any changes or modifications not expressly approved by the manufacture would void the
user’s authority to operate the equipment.
Trademarks
Product names mentioned in this manual may be trademarks or registered trademarks
of those products.
All trademarks or brand names mentioned are properties of their respective owners.
Preface
This OAM Managed 10/100/1000BASE-TX to 1000BASE-FX or 100/1000BASE SFP
Dual Rate Media Converter can be monitored and configured through management via
SNMP or browser interface. This manual describes how to install and use the Media
Converter. The Media Converter introduced here provides one channel media
conversion solution:
10/100/1000Base-TX to 1000Base-FX or 100/1000Base SFP interface
This Media Converter fully complies with IEEE802.3 10BASE-T, 802.3u 100BASE-TX,
802.3ab 1000BASE-T, 802.3z 1000BASE-X Ethernet standards.
In this manual, you will find:
Product overview
Features on the media converter
Illustrative LED functions
Installation instructions
System configuration
Specifications
