EtherWAN ED3638, Быстрый старт, Страница: 15 / 17

ED3638 www.etherwan.com
Connecting to Power
Redundant DC Terminal Block Power Inputs or 48VDC DC Jack:
Redundant DC Terminal Block Power Inputs
There are two pairs of power inputs can be used to power up this device.
You only need to have one power input connected to run the Hardened
Ethernet Extender.
Step 1: Connect the DC power cord to the plug-able terminal block on the Hardened
Ethernet Extender, and then plug it into a standard DC outlet.
Step 2: Disconnect the power cord if you want to shut down the Hardened Ethernet
Extender.
48VDC DC Jack
Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside
of the Hardened Ethernet Extender.
Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into
a standard AC outlet with the appropriate AC voltage.
User’s Manual
15