Model:
SQPRISMW / SQOPALMW
CIRPRISMW / CIROPALMW
IP65 LED Utility Fitting With Multi-Function Sensor
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE
Email: [email protected] / [email protected]
Visit our website:
www.eterna-lighting.co.uk
Made in China
Issue 1216
Pack contents:
1 x Base
1 x Diffuser
874/2012
MODELNO.
Fresh Prince Range
EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Directive” effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST - DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
CLEANING:
Clean this fitting only with a soft dry cloth.
Do not use any chemical or abrasive cleaners.
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, but may not be able to give specific
instructions regarding individual installations.
LED LAMP SPECIFICATIONS:
Luminaire lumens (opal)
1400 lm
Luminaire lumens (prismatic)
1600 lm
Lumens from chip (no diffuser)
1750 lm
Rated Wattage
18W
Rated luminous flux (Opal)
1350 lm
Rated luminous flux (Prismatic)
1550 lm
Nominal life time of the lamp
35,000 hrs
Colour temperature
4000K
Number of switching cycles
before premature lamp failure
15,000
Warm-up time up to 60% of the
full light output
Instant full light
Dimmable
No
LED array dimensions SQUARE
(L) 215 x (H) 215mm
LED array dimensions CIRCLE
240mmØ
Nominal beam angle
120°
Rated power
18W
Rated lamp lifetime
35,000 hrs
Lamp power factor
>0.9
Lumen maintenance factor at end
of nominal life
≥0.70
Starting time
<0.1s
Colour rendering
80 Ra
Colour consistency
Within 6 step
Macadam ellipse
Rated peak intensity
520cd
Rated beam angle
120°
Voltage / Frequency
240V~50Hz
Not suitable for accent lighting
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
