If you experience problems:
If your light is defective or develops a fault, please return it to the place where you bought it. You can call
our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting product
but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
Help line:
Tel: 01933 673 144 Fax: 01933 678 083 Email: [email protected]
For answers to frequently asked questions ( FAQs ) and other information visit our web-site
Lamp replacement:
>
Switch off the electricity at the mains.
>
Remove the glass diffuser by prizing the metal ring that retains it out of the fitting using a small flat
bladed screwdriver.
>
Pull the old lamp straight out of its socket and replace only with one of the same type and rating.
IMPORTANT ! Do not touch the lamp with bare fingers, use a soft clean cloth or tissue.
>
Replace the glass diffuser pressing firmly back into place.
Replacement lamp type:
Wattage: 20 W
Supply Voltage: 12 V
Type: G4 M47 capsule
Cleaning:
>
Clean this light fitting only with a soft dry cloth
>
Do not use any chemical or abrasive cleaners.
Eventually, you may want to replace this light fitting:
When your light fitting comes to the end of it’s life or you choose to update or upgrade it
by replacing it, please do not dispose of it with your normal household waste, please
recycle where facilities exist. When you need to dispose of this fitting, check with your
retailer or local authority for suitable options. New regulations will encourage the
recycling of Waste from Electrical and Electronic Equipment ( European “WEEE
Directive” effective August 2005 ).
PLEASE READ THESE INSTRUCTIONS BEFORE
INSTALLING YOUR NEW FITTING
- -
PLEASE RETAIN FOR FUTURE REFERENCE
Surface / recess mounted capsule
downlights
Model(s)
D040, D041, D042, D043, D044, D045
Pack contents:
Capsule downlight
1
Surface mounting ring
1
G4 M47 20W capsule lamp
1
Fixing pack
1
