Etec EXSS1042 Скачать руководство пользователя страница 1

 ETEC EXSS1042

• Supports most 10” - 42” Flat Panel TVs

• Maximum weight capacity: 55 lbs.

This product Wall Mount frame is intended for use only with an apparatus which has a maximum weight of 55 lbs.  See apparatus 

instructions.  Using with an apparatus heavier than the maximum weight indicated may result in instability and cause possible 

injury

READ THIS FIRST Read this entire manual!  Do not attempt to install this product if you do not understand the instructions.  

Contact a qualified mount installer if you have any doubts about a safe and secure mount installation, or if you are not sure what 

specific wall materials you are attaching this mount to.    Check  all  the  parts  carefully  to  make  sure  there  are  no  missing  or 

damaged parts.  Improper installation may result in damage to your TV, property, and personal injury.

• Forward / backward tilt range:

+5 to -15 degrees
• Left to right swivel range: 180 degrees
• Extension range: 2.7” to 8.6”
• Easy installation

For technical assistance or troubleshooting please call 

1-855-994-3832 or visit www.sibrandssupport.com

Содержание EXSS1042













Отзывы: