Etec EX303TS Скачать руководство пользователя | Manualshive

Страница: 1 / 12

background image

Three Shelf, Wall Mounted

A/V Component Stand

Installation Guide

Model: EX303TS

For technical assistance or troubleshooting

please call 1-855-994-3832.

This product is intended for use only with Audio/Video components (Not for use with any type of TV). The maximum weight

capacity per shelf is 22 lbs. See apparatus instructions. Using with an apparatus heavier than the maximum shelf support

weight indicated may result in instability and cause personal injury.

READ THIS FIRST

Read this entire manual! Do not attempt to install this product if you do not understand the instructions. Contact a qualified

mount installer if you have any doubts about a safe and secure mount installation, or if you are not sure what specific wall

materials you are attaching this mount to. Check all the parts carefully to make sure there are no missing or damaged parts.

Improper installation may result in damage to your Components, TV, property, and personal injury.

1
2
3
...
»

Содержание EX303TS













Отзывы:

Нет отзывов

Похожие инструкции для EX303TS

PDR Mounts PDM 625T

Бренд: David Engineering & Mfg Страницы: 6

Бренд: Ultimate Support Страницы: 2

BriteCor AC BBS

Бренд: LITESHEET Страницы: 4

Smart-Mount SP850-UNL

Бренд: peerless-AV Страницы: 28

Бренд: Hama Страницы: 22

Бренд: B-Tech Страницы: 16

TerraClamp MagicMount Pro Bolt

Бренд: Scosche Страницы: 4

Бренд: Konig & Meyer Страницы: 6

Бренд: ORION PLUS Страницы: 8

Бренд: Tripp Lite Страницы: 35

Бренд: arkitect Страницы: 10

Бренд: Thule Страницы: 7

Бренд: Thule Страницы: 8

Бренд: Hercules Страницы: 2

Easyrack 6617505 01 01

Бренд: hepco & becker Страницы: 4

Бренд: Emos Страницы: 8

Бренд: Emos Страницы: 24

Бренд: Crestron Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды