ETC Unison Echo Forward-Phase Dimmer-Gen 2 Скачать руководство пользователя страница 1

ETC Installation Guide

Echo Forward-Phase Dimmer–Gen 2

Corpora te He a dqua rte rs Middleton, WI, USA +1 608 831 4116
London, UK +44 (0)20 8896 1000 Holzk irc he n, DE +49 (80 24) 47 00-0
Rome , IT +39 (06) 32 111 683 Hong Kong +852 2799 1220 P a ris, FR +33 1 4243 3535
We b

etcconnect.com

Support

support.etcconnect.com

Conta c t

etcconnect.com/contactETC

© 2019 Electronic Theatre Controls, Inc.

Product information and specifications subject to change. ETC intends this document
to be provided in its entirety. Trademark and patent info: 

etcconnect.com/ip

7 1 8 7 M 2 1 0 5 Rev A Released 2019-12

Overview

The Unison Echo Forward-Phase Dimmer–Gen 2 provides control for individual
fixtures or zone power for 120 V and 277 V line voltage loads that require
forward-phase dimming, up to 600 watts. The Forward-Phase Dimmer–Gen 2
is compatible with all Echo control products, including daylight and
occupancy/vacancy sensors and manual control stations on the EchoConnect
control bus.

120 VAC 

model shown

The Forward-Phase Dimmer–Gen 2 controls lighting loads based on the
following:

Preset and Zone controls received from connected Echo control
stations

Ambient light levels as monitored by Echo Light Sensors

Occupancy state as monitored by Echo Occupancy/Vacancy Sensors

Input from other Echo control devices

Содержание Unison Echo Forward-Phase Dimmer-Gen 2













Отзывы: