E T C
®
Q u i c k G u i d e
Source Four
®
Revolution™ Rotating Wheel Module
Rotating Wheel Module Quick Guide
Page 1 of 2
Electronic Theatre Controls, Inc.
Americas
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
Tel: +1 608 831 4116
800 688 4116
Fax: +1 608 836 1736
800 555 8912
Europe
Unit 5, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Tel: +44 (0)20 8896 1000
Fax: +44 (0)20 8896 2000
Asia
Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
Tel: +852 2799 1220
Fax: +852 2799 9325
Web:
Email: (US)
(UK)
(Asia)
Service:
Toll free: 800 775 4382
Comments about this document:
7160M1330
Rev A
Released 02/2004
Copyright © 2004 Electronic Theatre Controls, Inc. All Rights Reserved. Product information and specifications subject to change.
Overview
The Rotating Wheel Module contains a wheel with three rotating/indexing positions for
static M-size steel or glass gobos or dichroic color filters and an open position.
Install a gobo/filter:
Step 1:
If module is currently installed:
a:
Power-down the fixture by moving the power switch to the “off” position.
b:
Remove the module from the fixture by loosening the two retaining screws and
pulling the module straight out of the head.
C A U T I O N :
Screws securing the modules, and the wheels themselves, may be hot if the fixture
has recently been lit. Allow the module to cool before installing gobos or filters.
Step 2:
Remove the spring securing the gobo/filter you want to replace or install. Use the
diagram below to determine the frame numbers on the wheel. The Rotating
Wheel Module has two magnets, one for calibrating the wheel position, and one
for calibrating the index position of the frames (found in the alignment hole of
frame #3).
M-Size Gobo
Detail: gobo installed
1
2
3
Open
(0)
Rotating Wheel Module
Magnets
Spring
Alignment Hole
