Source Four™ HID jr and Source Four™ HID jr Zoom
• 1
Gel frame
Barrel
Drop-in
Pattern
Yoke
Lamp housing
Gel frame holder
retaining clip
iris cover
holder slot
Yoke
Shutter
Ballast
locking knob
Source Four
™
HID jr and Source Four
™
HID jr Zoom
UL/cUL User Guide
Lamp type and general information:
Do not use lamps other than the following lamp type in Source Four HID jr/Zoom
fixtures.
Use of lamps other than specified below will void UL/cUL safety
compliance and your warranty.
•
Source Four HID jr/Zoom is suitable for damp locations
•
Yoke Can be canopy mounted
•
No recessed mounting
Caution!
Source Four HID jr/Zoom is
NOT
dimmable. Dimming will damage the
ballast and void warranty.
Table 1:
HID lamp reference
Ballast information
Caution!
The Source Four HID jr/Zoom
cannot
be dimmed.
•
Acceptable voltage is 120V (+/- 10%) 50/60HZ only
•
Operating current of 1.5 Amps
•
Inrush current of <14 Amps
•
Room ambient temperature should not exceed 104ºF (40ºC)
•
Lamp ignition voltage is 4.5Kv, non-hot restrike
•
Ballast case temperature should not exceed 167ºF (75ºC)
•
The ballast is attached to the Source Four HID jr/Zoom yoke by two screws, non-
remotable
Lamp Type
Manufacturing Codes
Watts Base Bulb
LCL
Ave. Hrs.
Initial
lumens
Color temp
Ceramic Metal Halide
CDM-T 150W/830
150
G12
T6
56mm
9000
14000
3000ºK
CDM-T 150W/942
150
G12
T6
56mm
9000
12700
4000ºK
MD150T6/U/G12/830
150
G12
T6
56mm
9000
14000
3000ºK
MBI150/T/30
150
G12
T7
57mm
6000
11500
3000ºK
MBI150/T/40
150
G12
T7
57mm
6000
11250
4000ºK
