Setup and Connect Guide
Page 1 of 2
Corporate Headquarters
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy Tel +39 (06) 32 111 683 Fax +44 (0) 20 8752 8486
Holzkirchen, DE
Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00
Hong Kong
Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325
Service:
(Americas)
(UK)
(DE)
(Asia)
Web:
www.etcconnect.com
Copyright © 2012 ETC. All Rights Reserved. Product information and specifications subject to change.
7543M1310-2.0.0
Rev C Released 2012-07 ETC intends this document to be provided in its entirety.
Convenience Outlets
UL outlet type is dual
Edison, CE outlet type
typically matches the
output connector type
M6 x 1 x 10
10mm head
M6 x 1 x 10
10mm head
M6 x 1 x 10
10mm head
M6 x 1 x 16
10mm head
use NEMA 14-15, 14-20, L14-20
use NEMA 21-20
NOTE: Using a NEMA L5-15, 5-15 or 14-15 input connector
derates the SmartModule 2 to 15A maximum input.
NOTE: Supply must be protected by Type C circuit
breaker, maximum 32A.
SmartModule 2
4 or 6 channel modules
DMX 512 compliant
RDM identify / RDM - DMX Address
UL / cUL Listed and CE Marked
Mains Power Specification
Input Connector is optionally supplied.
“Smart” User Interface
Local manual control of dimmers and 20
built-in chases for stand-alone operation
Multi-language software including English,
Spanish, German and French
DMX 512 In and Thru XLR connectors
4 channel
6 channel
UL / cUL
1Ø 100, 120 VAC 2Ø 120/240 VAC
100/200 VAC
2Ø 120/240 VAC
100/200 VAC 3Ø 120/208 VAC
100/173 VAC
CE
1Ø 230 VAC
1Ø 230 VAC
3Ø 230/400 VAC
Recommended (UL) Input Connector
1Ø
use NEMA L5-15, 5-15, L5-20, 5-20
2Ø
3Ø
2 wire + ground
3 wire + ground
4 wire + ground
Recommended (CE 230 VAC) Input Connector
1Ø
3Ø
2 wire + ground
4 wire + ground
16A or 32A CEE 1PNE
dual NF or dual Shuko load connectors use
Schuko or NF male
16A or 32A CEE 1PNE
UK15A Round Pin load connectors use UK15A
Round Pin male
16A or 32A CEE 3PNE
To maintain UL Listing, use a recommended input connector.
Dimmers and Circuit Breakers
10 Amp dimmer per circuit output with
magnetic circuit breaker (load protection).
Choice of output connectors
NOTE: Total load output cannot exceed
capacity of the mains power input.
Many supply breakers have an 80%
rating. 75 Watts minimum load per
dimmer for best results.
Optional
Wall Mounting
Optional
Pipe Hanging
NOTE: Mains Power Input for UL
models; d
o not exceed 20A
maximum per phase.
NOTE: Reference the SmartModule 2 Mounting Kits Installation Guide for mounting kit instructions.
4 channel wall
mounting kit
7543K1011
6 channel
wall mounting kit
7543K1012
4 channel pipe mounting kit
7543K1013
6 channel pipe mounting kit
7543K1014
