ETC Power Control Processor, Руководство по настройке

Страница: 20 / 64

14 Power Control Processor Configuration Manual
A r c h C o n t r o l S t a t u s
Arch Control Status displays several lines of information:
• Line 2 shows “Presets Active” if any presets are active in the rack. If no presets are active, “No
Active Preset” will be shown.
• Line 3 cycles (in 1 second intervals) between the following screens:
- “Sequence Active” if the sequence is active or if no sequence is currently active, “No Active
Sequence” is shown.
- The panel’s IP address if the Network Option Card is installed.
• Line 4 displays the system status. See
Status Messages
on
page 47
.
• Line 5 shows the lowest configured DMX Start address value in the Power Control Processor. If
the panel is patched straight (one for one), the equals sign (=) is used. When the panel is set up
with a custom address, approximate equals sign (

) is used instead.
• Line 6 alternates each second between the status of the DMX connection and, when the ports
are enabled, the status of the sACN connection.
- DMX Input will be displayed as either
Active , Inactive or Disabled .
- sACN Input will be displayed as either
Active, Inactive or Disabled
, but only when the ACN
option card is installed.
• Line 7 shows the status of the built-in Echo station power supply (On or Off) and the current
Power Control Processor software version number.
Backup Power Active
When mains power is no longer detected, after three seconds the panel will display a warning message
“
BACKUP POWER ACTIVE! ”. While this warning is displayed all other menu screens become
inaccessible.
Once mains voltage is restored, the display will revert back to the home screen and menu functionality
will return.
USB Media
The Power Control Processor includes a USB type A socket located on the left side of the user interface.
A USB storage device is not included and must be purchased separately.
Use a compatible USB storage device to save and load backup files of your configuration and to update
the Power Control Processor firmware. See
File Operations on page 35 for information on file
operations.
Compatible USB Storage Device
Use a USB storage device that is pre-formatted with the compatible FAT file system. As needed you can
reformat a USB storage device using a PC with the Windows
®
operating system or an Apple
®
Macintosh
®
computer. See the related operating system’s online help for instructions to format the USB
media.
Arch Control Status
Presets Active
No Active Sequence
System OK
DMX Start = 101
DMX Input: Active
v.2.0.0
• Line 1 shows:
- name of the display: Arch Control Status
- clock symbol - shown only when the timeclock has been enabled for
the panel. Reference
Timeclock
on
page 27
for more information on
timeclock functionality.
- [L] symbol is shown when levels are set locally at the panel.
- The
or arrow in the upper-right corner shows the option to
navigate to an additional menu.