ETC IRIDEON, Инструкция по установке и эксплуатации

Страница: 62 / 84

58 Software Hardware Components
Software/Hardware Components
Composer™ Software
Composer is a Windows® based PC application software which you
directly interact. The software allows you to program recall stations,
schedule lighting events and transfer information between the PC and the
MCP. It is a powerful, yet user friendly application that connects you with
your lighting system components. Composer Software is designed to
maximize the full potential of Irideon® multi-parameter luminaires.
Additionally, many DMX512 devices may be operated by the Composer
System.
Composer Lite™
Composer Lite is a Windows® based PC application software which you
directly interact. The software allows you to program presets, sequences
and transfer information between the PC and the luminaires.
Master Control Processor (MCP)
The MCP is a rack mount, wall mount, or connectorized unit that manages
both the remote control stations and the lighting fixtures by acting as a
remote central processing unit for the control of the system. The MCP can
receive and recall downloaded data from the PC, as programmed by
Composer Software, and store this data after the PC has been removed
from the system. The MCP has two dedicated RS485 output ports for the
control of up to 31 luminaires each. A third RS485 output port is available
for connection of up to 31 Remote Stations.
8 Button and 2 Button Recall Stations (8RS or 2RS)
The recall stations act as a remote playback control for invoking
programmed actions. These stations are wall mounted and available in 2-
button and 8-button versions. Recall stations are for use with the MCP and
are not supported by Composer Lite or DMX interpreter systems.
MCP Remote Programming Receptacle Station (MPR)
The MCP Remote Programming Receptacle Station is a wall mounted RS-
232 (DB9 connector) which allows for temporary remote connection of the
PC to the MCP via DB9 connector for initial programming of your system.
MCP Remote Programming Receptacle Stations are designed for use with
thee MCP and are not supported by Composer Lite or DMX Interpreter
systems.
Closure Station (CS)
The Closure Station provides eight dry-contacts for the installation of
remote sensors and/or switches to activate a programmed event. The user
provides the sensors and/or switches. Irideon Closure Stations are for use
with the MCP and are not supported by Composer Lite or DMX Interpreter
systems.
Key Switch (KS)
The Key Switch provides local security to a single Irideon recall station or
closure station. The Key Switch allows you to turn the 8 button, 2 button,
or Closure Station on or off, thereby enabling or disabling the system
control from that station. Irideon Key Switch stations are designed for use
with the MCP and are not supported by Composer Lite or DMX Interpreter
control systems.