ETC IRIDEON, Инструкция по установке и эксплуатации

Страница: 31 / 84

Irideon Control Installation and User Manual 27
DMX Interpreter
The DMX Interpreter is available in rack mount and wall mount versions.
Step 1: Mounting:
a. For rack mount, attach the two mounting brackets to the
sides of the DMX Interpreter and secure into a 4U space on
a standard 19” rack.
b. For wall mount, remove both left and right front panels and
secure unit to wall surface. This unit is not designed to
recess into the wall.
N o t e :
Knockouts are located on top, bottom, and sides of DMX Interpreter
chassis to facilitate hookup.
AC voltage connects to the DMX Interpreter terminal block located behind
the left front panel. In the rack mount version, an IEC connector has been
installed on the back panel and wired to the AC terminal block. All data
connections are to terminal blocks located behind the right front panel.
N o t e :
An IEC power cord is required (not supplied) for the rack mount version
of the DMX Interpreter.
Two part plug-in terminal strips are utilized to connect wiring from the DMX
console to the DMX Interpreter and from the DMX Interpreter to the
luminaires.