IRID 110
AR500 Disassembly Instructions
Revised: 7/27/2000
Page 1 of 2
IRID 110
IRID 110
IRID 110
IRID 110
AR500 DISASSEMBLY INSTRUCTIONS
AR500 DISASSEMBLY INSTRUCTIONS
AR500 DISASSEMBLY INSTRUCTIONS
AR500 DISASSEMBLY INSTRUCTIONS
Important Note
Important Note
Important Note
Important Note
Units are static sensitive. Observe care when installing/servicing. Retain original packaging for
returns/service.
Stanchion
Stanchion
Stanchion
Stanchion
Note: Make sure gaskets make a good seal whenever changing out parts.
Note: Make sure gaskets make a good seal whenever changing out parts.
Note: Make sure gaskets make a good seal whenever changing out parts.
Note: Make sure gaskets make a good seal whenever changing out parts.
Ballast Plate
Ballast Plate
Ballast Plate
Ballast Plate
•
Different Ballasts for different voltages
Composer Control Protocol Plate
Composer Control Protocol Plate
Composer Control Protocol Plate
Composer Control Protocol Plate
•
CPU
•
Address Wheels
√
≈
00
∆
is self-test
•
LED»s
√
Green is data, yellow is power
•
Comm protection PCB
•
Power supply
•
Fuse for Power to CPU
•
Resistor
DMX512 Control Plate
DMX512 Control Plate
DMX512 Control Plate
DMX512 Control Plate
•
Address Board
√
Self-tests in the 900 range
•
Power Supply
√
2 fuses
•
CPU
√
2 fuses
•
Power to board
•
Data
•
Igniter (remote stanchion)
•
Remove cover from remote foot (loosen screws in diagonal pattern)
•
Disconnect AC from T-block
•
Remove screws from Igniter mounting plate and pull out igniter