ETC Setup Guide
Ion Xe Remote Processor Unit
Corporate Headquarters
Middleton, WI, USA
Tel +608 831 4116
Service: (Americas)
London, UK
Tel +44 (0)20 8896 1000
Service: (UK)
Rome, IT
Tel +39 (06) 32 111 683
Service: (UK)
Holzkirchen, DE
Tel +49 (80 24) 47 00-0
Service: (DE)
Hong Kong
Tel +852 2799 1220
Service: (Asia)
Web:
etcconnect.com
© 2017 Electronic Theatre Controls, Inc.
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
4311M2210
Rev A
Released 2017-08
This guide outlines the setup and configuration of your Ion Xe RPU. For information on using the Eos Family
software installed on your RPU, please refer to the Eos Ti, Eos, and Gio Operations Manual
that shipped
with your console or you may download it from our website at
The Ion Xe RPU can be used as a primary, backup, or client processor with any Eos Family desk. It can also
be used for independent playback applications. The Ion Xe RPU ships with the following:
• Remote Processor Unit
• USB Keyboard
• USB Mouse
• Rack Mount Hardware Kit
• IEC Power cord
• Label Set
• This Setup Guide and Current Release Note Documentation
Hardware Setup
Rear Panel
1:
Attach the IEC power cord to the power connector.
2:
Connect any monitors to the display ports on the back of the RPU.
3:
Connect the mouse and keyboard to the USB connectors.
4:
Attach network ethernet cable(s) to the ethernet port(s).
5:
Once all accessories have been connected, you may activate the hard power switch on the rear panel.
Hard Power Switch
IEC Power
Connector
Ethernet
Ports 1 & 2
Audio Ports
(Not Currently
Enabled)
Remote
Trigger
Four DMX512A/
RDM Ports
Two USB
Ports
Two USB
Ports
Two
Display
Ports