16
Lonestar User Manual
Configure the Fixture
You can configure Lonestar fixtures through the onboard user interface.
Navigate the User Interface
1. Press the [MODE/ESC] button
Mode
Esc.
to access the main menu. (The display is powered by
battery when the fixture has no power; press and hold the [MODE/ESC] button
Mode
Esc.
for three
seconds to access the main menu.)
2. Browse the menu by pressing the up, down, left, or right navigation buttons.
3. Press the Enter button
to select a menu item.
4. Modify the selection by pressing the up, down, left, or right navigation buttons according to
the selection.
5. Press the Enter button
to confirm a modified selection.
6. To exit the menu, press the [MODE/ESC]
Mode
Esc.
button.
