ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 146 / 292

136 Emphasis Console v1.4.0 User Manual
Create groups in the spreadsheet display:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: Press [Group] [Enter] to view groups in Blind.
Step 3: Press [S3 - Spread Sheet] to display the group spreadsheet.
Step 4: Press [S2 - Create Group] [ x ] [Enter] to create group [x].
Step 5: Press <Channel> [ y ] to select channel [y]. You can also use [And] , [Thru] and
[Except] to select multiple channels.
Step 6: Press [At] [ z ] to set selected channels to level [z].
Step 7: Repeat steps 5 and 6 until all required levels are set.
Delete groups in the spreadsheet display:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: Press [Group] [Enter] to view groups in Blind.
Step 3: Press [S3 - Spread Sheet] to display the group spreadsheet.
Step 4: Press [S6 - Delete Group] .
Step 5: Press [ x ] to select group [x]. You can also use [And] , [Thru] and [Except] to
select multiple groups.
Step 6: Press [Enter] to delete the selected group(s).
Step 7: Press [Enter] to confirm that you really want to delete the group(s).
Replace levels in the spreadsheet display:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: Press [Group] [Enter] to view groups in Blind.
Step 3: Press [S3 - Spread Sheet] to display the group spreadsheet.
Step 4: Press [ x ] to select group [x]. You can also use [And] , [Thru] and [Except] to
select multiple groups.
Step 5: Press [Channel] [ y ] to select channel [y]. You can also use [And] , [Thru] and
[Except] to select multiple channels.
Step 6: Press [S3 - Replace Level] [ z ] [Enter] , where [z] is the level you want to replace.
Only channels at that level are selected. Use the [Full] key to select channels at
that level.
Step 7: Press [ a ] [Enter] , where [a] is the level you want to replace the level [z].