ETC Emphasis Lighting Control System, Руководство пользователя

Страница: 143 / 292

5
Blind Editing 133
Groups
If you find yourself selecting the same groupings of channels over and over, or you always
want to set levels for certain channels proportionally relative to each other, you can record
those channels with levels to a group . A group is a simple way to select multiple channels
with minimal key presses. You can record and edit groups in Stage or in Blind. In Blind, you
have access to the additional Group List and Group Spreadsheet displays.
Edit groups in Blind:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: Press [Group] [ y ] [Enter] to select group [y]. You can also use the [+] and
[-] keys to increment and decrement through the recorded groups.
Step 3: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 .
Step 4: Set levels using the procedure described in Set Levels, page 75 and Moving
Light Control, page 80 . “Not Recorded” will blink in the lower left corner of the
channel area.
Step 5: Press [Record] <Group> < y > [Enter] , where [y] is the target group number.
N o t e :
When you edit cues, submasters, groups or focus points in Stage, Fader or Blind,
changes to channel levels or effects are not recorded until you press [Record] [Enter] .