ETC Element Classic, Руководство пользователя

Страница: 432 / 687

418 Ion Classic User Manual
•
List of all parameter values with their address, home value, snap parameter, DMX value,
and parked value (if any)
{Fixture Notes} displays information found in the fixture library such as:
•
Revision Number
•
Release Date
•
Alternate Names
•
Usage Notes
{Lamp Controls} displays controls for the lamp, available RDM commands, or other parameters
of the device (if it is an automated fixture).
[About] Address
Press [About] to put the CIA into About mode. When an address is selected, the information
below is displayed. You can select the information you wish to view from the buttons located
on the right side of the CIA. Additional buttons may display based on RDM and Sensor
Feedback if enabled. The buttons are:
{Address} displays the following information:
•
Address number (displayed as straight address and port/ offset)
•
Dimmer label (if any)
•
Associated channel number, which is a hyperlink to the [About] channel display.
•
Part number (if any)
•
Notes
•
Output value (sACN, Net2, Art-Net, AVAB UDP, or DMX)
•
Current output value and source of output
•
Parameter controlled by the address
•
Home Value
•
Basic patch information
•
Extended patch information (if available)
•
If it is a scroller, color/ gobo wheel, the assigned scroll or wheel is indicated
•
Information stored in the Text 1 through10 and the Notes fields in Patch > Database
{Next Part} and {Last Part} will advance to the next part or go back to the previous part. This
only displays for addresses with parts.
{Go To Patch} is a shortcut to edit the patch for the address selected. This will open up the
patch display.
{Fixture Notes} displays the following information:
•
Revision number
•
Release date