ETC Element Classic, Руководство пользователя

Страница: 117 / 687

System Basics 103
•
N Indicates the value is null (from either {Make Null} or a filter).
•
P Indicates the channel is parked.
•
Ph Indicates the channel is at a preheat level.
•
Pr Indicates that the value is referenced to a preset. This text is followed by a number,
indicating which preset is being referenced. The preset label may also be shown if this
setting is enabled (see
Show Ref Labels (on page 214) ). Holding down [Shift] & [Label]
will toggle between the preset label and preset number.
•
Q Found in the non-intensity categories of a marked channel. The “Q” is followed by a
number indicating which cue the mark is in preparation for.
•
t The channel has discrete (parameter/category-specific) timing.
•
S Indicates that a channel is stored to a shielded submaster.
•
R Indicates a manual reference override. Manual changes have been made that override
a previously stored reference (such as to a palette or preset). Once recorded, the
reference will be broken. If updated, the referenced target will be updated as well,
unless otherwise instructed.
Live and Blind Configuration Menu
The Live/ Blind displays have a configuration menu. The configuration settings are available by
selecting the display tab and then double clicking on the tab to open the menu. With the Live/
Blind display selected, you can also select the gear icon, which is located to the left of the tabs,
to open the configuration menu.
Note:
Each instance of Live/ Blind may be configured individually.
The following options are available:
•
Suppress Target Status Bar - Hides the target status bar from the display. The target
status bar displays at the bottom of the Live/ Blind displays.
•
MC Line Wrap - When enabled, this option keeps all of the cells together of a multicell
fixture when viewing it in Live summary view instead of breaking them up across
multiple rows.
•
Suppress Target Labels - Hides the Label column in Blind spreadsheet view.