Echoflex Installation Guide
Power Load Controller
Corporate Headquarters
Middleton, WI, USA
|
Phone
+1 608 831 4116
Web
|
info@echoflexsolutions.com
|
Support
© 2021 Echoflex Solutions, Inc. Trademark and patent info:
Echoflex intends this document to be provided in its entirety. Product information and specifications subject to change.
8189M2130
Rev B Released 2021-04
Overview
The ELEDR Power Load Controller
is used to switch circuits for
lighting, motor, receptacle, or
general purpose loads. It receives
input from linked wireless devices
or gateways based on switch
stations, room occupancy state,
ambient light levels, scheduled
events and network commands.
The ELEDR can also provide
process control for circuit or fan
control applications eliminating
long wire runs.
This document covers installation
of ELEDR(H) Power Load
Controller models. The
Echoflex Power Load Controller ELEDR Configuration
Guide
is available for download at
The package contents includes the controller and the installation guide.
Prepare for Installation
Echoflex recommends paying special attention to the installation
environment.
• High density construction materials and large metal appliances or
fixtures in the space may disrupt wireless reception.
• Mount the controller to an electrical junction box or a panel in a
location and at a height where it is not subject to tampering by
unauthorized personnel.
Supplies required to install the controller (not provided):
• Appropriately sized wire nuts
• Wire insulation
• Small cable ties
High voltage
model shown
