ETC Echo Echoflex Interface Скачать руководство пользователя страница 1

Страница: 1 / 3

How Do I Configure the Echo Echoflex Interface?

Question

The Echo Echoflex Interface (EEI) has a lot of buttons and options, how do I go about setting it up and making sure it
works?

Answer

As explained in another article,

, the heart of this device is to set up

communication between Echo and Echoflex systems. While the

goes into complete detail regarding

how to set up this device, below is a quick breakdown of the main setup and control options.

Steps/Controls

Configure the Echo Side

1. Assign Echo space via dial

2. Program which presets/zones the inputs/outputs talk to

a. Press and hold ‘RECORD/PROGRAM’ button for 3 seconds to enter program mode

b. Tap ‘SELECT’ button to navigate to desired input/output

c. Output Status LEDs will indicate preset/zone number for the selected input/output

d. Tap ‘ON’ and ‘OFF’ buttons to increase preset or zone number

e. Tap ‘RECORD/PROGRAM’ button to save changes and exit program mode

Configure the Echoflex Side

1. Link inputs (learn EEI to Echoflex input devices [stations/sensors])

a. Tap ‘SELECT’ button to choose desired input

b. Tap ‘LEARN/TEACH’ button on EEI to put the EEI in LEARN mode

Updated: Fri, 17 Sep 2021 16:17:12 GMT

Содержание Echo Echoflex Interface

Страница 1: ...dial 2 Program which presets zones the inputs outputs talk to a Press and hold RECORD PROGRAM button for 3 seconds to enter program mode b Tap SELECT button to navigate to desired input output c Outpu...

Страница 2: ...te to both sides 1 Of wireless inputs a Tap SELECT button to choose desired input b Use ON and OFF buttons to simulate on event action and off event action I Ex A If echoflex switch station linked to...

Страница 3: ...hot current look Related Links References What Does the Echo Echoflex Interface Do Echo Echoflex Interface Installation and Programming Manual https support etcconnect com ETC Architectural Aero_and_E...